Engine Problems & Engine Repair
Engine problems range from simple to complex — rough idle, loss of power, knocking, or stalling each point somewhere different. We start with a thorough diagnosis, combine code data with hands-on testing, and help you understand the most sensible path forward before any work begins.

Can I Drive With This?
Safety comes first. Use these urgency levels to decide your next move — and call us if you're unsure.
Flashing light with shaking — severe misfire; stop safely.
Stalling, hesitation, or knocking — drive minimally and book now; stalling in traffic is a safety risk.
Rough idle, loss of power, or a steady light — book a diagnostic soon.
What's It Doing?
Pick the symptom that matches what your vehicle is doing. The label tells you how urgent it is. Possible cause is not a confirmed diagnosis — testing confirms it.
Rough idle
Misfire, vacuum leak, dirty throttle body or MAF, ignition, or fuel. A light may accompany it. Diagnosis combines code data with testing.
Loss of power / poor acceleration
Restricted fuel or air, ignition, engine-management, or exhaust restriction. A light helps narrow it; testing confirms.
Engine knocking or ticking
Can be a lubrication issue, valvetrain, fuel quality/timing, or internal. A proper diagnosis is essential — drive carefully and book soon.
Stalling or hesitation
Fuel, ignition, or engine-management causes. If it stalls in traffic, drive minimally and book a diagnosis right away.
Flashing light + shaking
Severe active misfire. Stop safely and have it diagnosed before driving further.
Possible Causes
These are common causes — not a diagnosis. We test to confirm the actual one before recommending any repair.
Misfire (spark or fuel)
A cylinder skipping — shaking, roughness, or a flashing light. Cause could be a plug, coil, injector, or vacuum leak.
Vacuum leak or air-metering fault
Unmetered air causes rough idle and stumbling.
Fuel or air restriction
Clogged filter, mass-airflow sensor, or exhaust restriction — causes loss of power.
Engine-management sensor
A sensor out of range affects running and can set a light.
Internal mechanical / lubrication
Knocking, ticking, or low compression — needs proper diagnosis before any repair is recommended.
Frequently Asked Questions
Rough idle can be caused by a misfire, vacuum leak, dirty throttle body or mass-airflow sensor, ignition issue, or fuel-system problem — and a check-engine light may accompany it. Diagnosis combines code data with hands-on testing to find the actual cause.
Need This Looked At?
Call us and describe what's happening. We'll help you understand what may be going on and what your next step should be — before any work begins.
604-599-1223Unit 102 – 12465 82 Avenue
Surrey, British Columbia
Mon–Fri 9AM–5:30PM · Sat 9AM–3:30PM
