Engine Repair
Engine problems can range from simple to complex. Darcy's starts with a thorough diagnosis, explains what we find, and helps you understand the most sensible path forward — because engine symptoms like rough idle, loss of power, or knocking can have several possible causes.

Common Symptoms
Engine knocking or ticking
Can be serious or minor. We diagnose the source before recommending repair.
Loss of power
Fuel, ignition, airflow, or engine-management issues can contribute. We diagnose the cause.
Rough idle
A misfire, vacuum leak, or sensor issue is possible. We scan and test.
Stalling
Fuel, ignition, idle control, or sensor issues can cause stalling. We diagnose the cause.
Visible fluid leaks
Oil, coolant, or other fluids. We identify the source.
Burning smell
An oil leak onto a hot surface or another fluid. We inspect to find the source.
Can I Drive With This?
STOP
Severe knocking, major loss of power, or a flashing check-engine light with shaking — stop safely and arrange inspection or towing. Darcy's does not provide towing; customers arrange it separately.
DRIVE WITH CAUTION
Mild rough idle or slight power loss with a steady light — drive carefully and book soon.
BOOK
Rough idle, loss of power, knocking, stalling, or a fluid leak — book an engine diagnosis.
MONITOR
Occasional minor change — mention it at your next service.
Possible cause is not a confirmed diagnosis. When in doubt, call us.
What Darcy's Checks
These are the items that may be inspected. We don't claim every component is always tested or replaced — we check what's relevant to your symptom.
- Diagnostic scan for stored trouble codes
- Ignition system (spark plugs, coils, wires)
- Fuel delivery (injectors, pressure, pump)
- Air intake and vacuum system for leaks
- Sensor readings (MAF, O2, coolant, MAP)
- Engine mechanical (compression where relevant)
- Fluid level and condition, leaks
- Belts, hoses, and cooling
How the Service Process Works
- 1
You tell us what the engine is doing — the sound, the feel, and when it happens.
- 2
We scan for codes and inspect the relevant systems.
- 3
We test components to confirm the actual cause.
- 4
We explain our findings and the priority.
- 5
We discuss options and let you decide.
- 6
Work proceeds according to the shop's normal process.
Possible Causes & Repairs
These are categories of potential causes — not a confirmed diagnosis. We test to confirm the actual cause before recommending any repair.
Ignition fault
Worn spark plugs, a failing coil, or ignition wiring causing misfire or rough idle.
Fuel-delivery issue
A clogged injector, weak fuel pump, or fuel-pressure problem.
Vacuum or intake leak
Unmetered air causing rough idle or a lean condition.
Sensor fault
A MAF, O2, coolant, or MAP sensor reading outside range.
Engine mechanical wear
Compression loss, valve, or timing-chain issues — more serious.
Fluid leak
Oil or coolant leaking onto hot surfaces or onto the ground.
Customer Education
Why an engine runs rough
A rough idle can come from a misfire, a vacuum leak, a sensor fault, or a fuel-delivery issue. We scan for codes and test components to find the actual cause rather than guessing — replacing parts based only on a code can waste money.
What engine knocking or ticking means
Knocking can be serious (bearing or detonation) or minor (valve or injector tick). The sound, when it happens, and whether it changes with rpm tell us a lot. We diagnose the source before recommending repair.
Why a car loses power
Fuel, ignition, airflow, or engine-management issues can all reduce power. A restricted filter, a failing sensor, or a mechanical issue. We diagnose the cause rather than assuming.
Why a car stalls
Fuel, ignition, idle-control, or sensor issues can cause stalling. When it stalls (hot, cold, at idle, under load) helps narrow the cause. We test to confirm.
Why fluid leaks matter
Oil or coolant leaks can damage components or lead to bigger failures. A small leak onto a hot surface causes a burning smell; a coolant leak can lead to overheating. We identify the source and the priority.
Engine Repair in Surrey, BC
Darcy's Auto Service is a proudly father-and-son owned independent repair shop at Unit 102 – 12465 82 Avenue, Surrey, BC V3W 3E8. We've served Surrey drivers for 28+ years. Call us and describe what your vehicle is doing — we'll help you understand what may be happening and what your next step should be.
Address
Unit 102 – 12465 82 Avenue, Surrey, BC V3W 3E8
Phone
604-599-1223Hours
Mon–Fri 9AM–5:30PM
Sat 9AM–3:30PM · Sun Closed
Frequently Asked Questions
Direct answers about engine repair.
Why is my engine idling rough?
A misfire, vacuum leak, sensor fault, or fuel-delivery issue can cause rough idle. We scan for codes and test components to find the actual cause rather than guessing.
Why is my car losing power?
Fuel, ignition, airflow, or engine-management issues can all reduce power. We diagnose the cause rather than assuming.
What does engine knocking or ticking mean?
Knocking can be serious (bearing or detonation) or minor (valve or injector tick). The sound and when it happens tell us a lot. We diagnose the source before recommending repair.
Why does my car stall?
Fuel, ignition, idle-control, or sensor issues can cause stalling. When it stalls (hot, cold, at idle, under load) helps narrow the cause. We test to confirm.
Why do I smell burning from the engine?
An oil leak onto a hot surface or another fluid is possible. We inspect to find the source and the priority.
Is engine knocking serious?
It can be. Deep knocking can indicate a bearing or detonation issue; lighter ticking can be a valve or injector. We diagnose the source before recommending repair — don't ignore it.
Can a sensor cause rough idle?
Yes. A MAF, O2, coolant, or MAP sensor reading outside range can cause rough idle or poor running. We scan and test to confirm.
Should I drive with a rough-running engine?
A steady light with mild roughness — drive carefully and book soon. A flashing light with shaking — stop safely and arrange inspection or towing. Darcy's does not provide towing; customers arrange it separately.
What should I tell the repair shop about an engine problem?
Tell us what you hear (knock, tick, rattle), when it happens (idle, under load, cold, hot), whether there's a loss of power, whether it stalls, and whether any warning lights are on.
Can a vacuum leak cause rough idle?
Yes. Unmetered air entering the engine causes a lean condition and rough idle. We test for vacuum leaks as part of an engine diagnosis.
